top of page
DESIGN OPTIONS
FINETANK - GRP Sectional Tanks are supplied in various options to meet different market demands.
The variaty of panel sizes (1m, 1.5m, 2m, half panels and more) allows to build tanks in any shapes and any capacities to fit into limited spaces. Depends on environmental conditions, insulated or non-insulated tanks also can be applied.
Various options to meet different demands
WALL PANEL ARRANGEMENT
Tanks can be erected to hight range of 0.5m~5m in 0.5m and 1m increments. The following is only an example and there can be more variations by combinations of different panels.
VARIOUS TANK SHAPES
FINETANK fits into any limited space as its structure utilizes hotizontal and vertical spaces at the maximum through the use of diverse sizes of panels.
Regular rectangular shape L - shape C - shape O - shape
INTERNAL PARTITION
FINETANK can be divided into multi-compartments using standard panels and components. Divisions shall be stayed to enable one compartment of the tank to be emptied whilst the other compartment is in service. Partitioned tank is also recommended in a narrow space where multiple tanks for different uses (domestic water , firefighting, etc.) are required.
THERMAL INSULATION
The thermal insulation panel with 3-layer (GRP panel + PU foam + Resin cover) structure minimizes temperature change the stored water and prevents dew condensation.
Typical Cross Section
Thermal Conductivity
Materials Thermal conductivity - Kcal/m.hroC (J/m.hroC)
GRP (PU insulated) 0.02 (84) [ PS (Polystyrene) insulated - 0.039 ]
GRP (Non-insulated) 0.15 (630)
Steel 37.0 (155x105)
INSTALLATION SPACE
About 600mm free space in all directions is required as shown below for maintenance and installation of tanks.
[ PLAN VIEW ]
[ SIDE VIEW ]
bottom of page